Adopting new technology or tools into your business can be hard. But when you’re a small team, every minute counts and finding ways to do more with less is essential.
When Lonny Reed, owner of Legend Engineering and professional engineer licensed in 20 states, was faced with a staffing shortage and strained resources, he sought to expand his toolbox with drone surveying.
Established in 2005, Legend Engineering performs topographic surveys and design for retail and industrial projects across the US, along with surveying and construction management. Based in Heber, Utah, it has about a dozen employees with two to four surveyors on staff at any one time.
Reed first heard about drones as a worksite tool when working with Komatsu’s Smart Construction initiative. “They’d use some of our sites as test sites to do drone surveying,” said Reed. “We knew that we needed to get into the drone survey world for a few years, and it never seemed feasible because of the amount of processing.”
But once Legend Engineering decided to go all in on drone surveying, they did their homework on the data processing side of things.
When they had Part 107-certified drone pilots, they flew some test sites to process data using Pix4D. “We were getting ready to start [using] it on [project] sites, but without much confidence. Processing error and processing time was an issue,” recalled Reed. They were seeing errors of three or four feet, after an arduous time of processing data.
With time being a limited and valuable resource, self-processing was a bad fit for Legend Engineering.
After one of his surveyors was injured during an on-site survey, Reed knew he needed a solution that worked to help with his surveying jobs. “He hurt his knee. He actually quit the surveying profession on us. We’ve had a terrible time trying to replace him,” said Reed.
Without one of Legend Engineering’s vital surveyors, Reed needed to use his team’s time as efficiently as possible. Work was piling up. Even for smaller, one- or two-acre sites, survey would take a whole day when you factored in travel time.
Before using drone surveying, man hours and crew time expended to get survey data was one of their bigger time sinks. “Being able to get out and do all the field work we needed with one field surveyor and one office surveyor—our field time was becoming the bottleneck,” Reed noted.
What Propeller Brought to the Worksite
Using drones to survey sites, the Legend Engineering team can now capture a survey in a couple of hours. With all that extra time, surveyors can also capture the boundary lines of a site, if needed.
Legend Engineering frequently surveys many small sites. So while the surveying itself can be done quicker than on larger sites, the team has to travel more often, which adds a lot of commute time to the average job.
With the time put back on the clock, Reed and his team can do more with the same resources. “What we’ll do is have our surveyors do the boundary, property lines, and set control for us. Then one of us will go out with the drone and pick up the rest of the information. That allows the surveyors to do their job and pick up more sites,” explained Reed.
Reed sees using drone surveying and Propeller as an aid to save time both in the field and in the office.
“If you look at it just from an office-time standpoint, you usually have someone in the office who you’re paying $20–50 per hour plus the software plus the processing time and all that,” said Reed. That’s just the baseline, and doesn’t include the cost it takes to capture good data.
Before using Propeller to process their data, Legend Engineering had at least one staff member doing the processing, which could take a day to a day and a half to complete.
“But uploading the drone photos to Propeller takes 20 minutes and then they can go about their day,” said Reed. With a small and nimble team like Legend Engineering’s, any time saved on administrative tasks has a big impact.
Not only does Propeller take care of all the data processing on our servers—freeing up company machines—QA reports are provided for every dataset and every dataset is reviewed by geospatial experts. “The final map comes back in less than 24 hours,” said Reed. “You can get the files you need where they’re supposed to be and it’s accurate—it’s a no brainer.”
The potential for using drone surveying to collect data in the field and the Propeller Platform to process drone data and visualize it was huge. But Propeller also proved to be a tool to improve Legend Engineering’s communication with clients.
The Lasting Impact
Before Propeller, Legend Engineering ran client meetings with the conventional data and visualization—that is spreadsheets.
“From an engineer’s standpoint, that’s easy to look at and see what you’re dealing with. But for the contractor or client, it’s hard to see what’s going on there,” noted Reed. “Being able to see the color-coded map and rotate that [3D site survey] is a game changer for them.”
Old Dominion is Legend Engineering’s biggest and most important client. The company has a number of teams based around the country, and they recently adopted take-off software for preliminary work on a select group of projects.
When Reed and his team explained how they were using Propeller’s data and visualization software to work on their sites, “they were pretty excited,” noted Reed. After they built a few models to see what the software was capable of, they started using Propeller as a resource on weekly conference calls.
When you’re a small, agile team like Legend Engineering, the benefits of new technology can be felt quickly and keenly. Because there are fewer people to onboard, the integration process is smoother and the implementation can be immediate.
For Legend Engineering, using drones to survey their sites and Propeller to process and visualize data means they can cover gaps in staffing and save surveyor time—all while communicating better with clients and each other.